Calibration Beads - for accurate sieve calibration in a matter of minutes
Calibration Check Beads - used with a set of master sieves for performance checks
Supplied in sets of 5 single shot bottles, each shot is suitable for one calibration test, thereby avoiding operator error. These provide a quick and economical method of calibrating sieves.
These Sieve Calibration Beads are manufactured from soda-lime glass and certified using NIST & NPL traceable electroformed sieves. They are accurate to 1 micron for the smaller aperture sieves and are supplied with a certificate of analysis.
|SZ662||32µm||1g||SZ677||400µm, 425µm, 450µm||2.5g|
|SZ663||36µm, 38µm, 40µm||1g||SZ678||500µm||2.5g|
|SZ664||45µm, 50µm||1g||SZ679||560µm, 600µm, 630µm||2.5g|
|SZ666||63µm||1g||SZ681||800µm, 850µm, 900µm||2.5g|
|SZ667||71µm, 75µm, 80µm||1g||SZ682||1mm||7g|
|SZ668||90µm||1g||SZ683||1.12mm, 1.18mm, 1.25mm||10g|
|SZ669||100µm, 106µm, 112µm||1g||SZ684||1.40mm||15g|
|SZ670||125µm||1.5g||SZ685||1.60mm, 1.70mm, 1.80mm||15g|
|SZ671||140µm, 150µm, 160µm||1.5g||SZ686||2.00mm||20g|
|SZ672||180µm||1.5g||SZ687||2.24mm, 2.36mm, 2.50mm||20g|
|SZ673||200µm, 212µm, 224µm||1.5g||SZ688||2.80mm, 3.15mm||25g|
|SZ674||250µm, 280µm||2.5g||SZ689||3.35mm, 3.55mm||25g|
Supplied in 1kg packs
These beads are to be used for performance checks, together with a set of master sieves.
|Part Number||Bead Ø||Part Number||Bead Ø|
|SV100||0.0 to 0.050mm||SV136||2.850 to 3.300mm|
|SV102||0.040 to 0.070mm||SV138||3.300 to 3.600mm|
|SV104||0.070 to 0.110mm||SV140||2.0mm +/ - 0.1mm|
|SV106||0.090 to 0.150mm||SV142||3.1mm +/- 0.1mm|
|SV108||0.100 to 0.200mm||SV144||4.0mm +/ - 0.3mm|
|SV110||0.150 to 0.250mm||SV146||4.5mm +/ - 0.3mm|
|SV112||0.200 to 0.300mm||SV148||5.0mm +/ - 0.3mm|
|SV114||0.250 to 0.500mm||SV150||6.0mm +/ - 0.3mm|
|SV116||0.400 to 0.600mm||SV152||7.0mm +/ - 0.3mm|
|SV118||0.500 to 0.750mm||SV154||8.0mm +/ - 0.4mm|
|SV120||0.750 to 1.000mm||SV156||9.0mm +/ - 0.4mm|
|SV122||1 .000 to 1 .230mm||SV158||10.0mm +/ - 0.5mm|
|SV124||1 .250 to 1 .550mm||SV160||11.0mm +/ - 0.5mm|
|SV126||1.550 to 1.850mm||SV162||12.0mm +/ - 0.5mm|
|SV128||1.700 to 2.000mm||SV164||14.0mm +/ - 0.5mm|
|SV130||2.000 to 2.400mm||SV166||16.0mm +/ - 0.5mm|
|SV134||2.400 to 2.900mm|
Impact Test Equipment is a UK sieve manufacturer with UKAS accreditation for the calibration of both plate type & woven wire type test sieves.
Visit our calibration page for more information.