Sieve Shakers: Impact offers a range of high performance sieve shakers

Sieve Shakers - sieve diameters accepted

Sieve Ø SV001 SV003 SV005 SV007 SV008 SV010 SV012 SV015 SV016 SV017 SV020 SV025
75mm                    
100mm                    
150mm                    
200mm   Air Jet
250mm                
300mm          
315mm                
350mm                      
400mm                    
450mm                    
8 inch        
12 inch              
Screen Trays                      

SV001 Motorised Sieve Shaker for 200, 250, 300 & 315mm, 8 & 12 inch diameter sieves

This is a simple & low cost Sieve Shaker, ideal for both site & laboratory use. It incorporates an electric motor to provide an effective sieving action.

This unit will accept 200, 250, 300 & 315mm, 8 & 12 inch diameter sieves.

Motorised Sieve Shaker SV001

The shaker can hold up to eight 200mm diameter sieves or seven 300mm diameter sieves. It is fitted with a 0 to 60 minute timer. Wet sieving lids & receivers in the appropriate sizes may be used with this shaker.

SV001 Specification
Timer 0 - 60 minutes
Rating 110W
Power Supply 220-240V 50Hz 1ph
Dimensions 350 x 400 x 950mm
Weight 24kg

SV003 Motorised Sieve Shaker for 200, 300, 8 & 12 inch diameter sieves

This shaker will accept up to twelve 200mm or 8 inch diameter sieves, lid and receiver or up to six 300mm or 12 inch diameter sieves, lid and receiver.

Motorised Sieve Shaker SV003

The timer is variable with a range of 10 to 60 minutes to set the duration of the test. It stops automatically at the end of the set time duration. Wet sieving lids & receivers in the appropriate sizes may be used with this shaker.

SV003 Specification
Timer 10 - 60 minutes
Power Supply 220-240V 50Hz 1ph
Dimensions 525 x 510 x 1085mm
Weight 78kg

SV005 Electromagnetic Sieve Shaker for 200, 250, 300 & 315mm, 8 & 12 inch diameter sieves to EN 932/5, ISO 3310/1

This Sieve Shaker uses electromagnetic impulses to impart a triple vibrating action.

  • Vertical
  • Lateral
  • Rotational

The shaker is of a simple and sturdy construction making it ideal for continuous and intense use. It is operated and controlled via a separate control panel enabling high precision, performance and repeatability.

This unit will accept 200, 250, 300 & 315mm, 8 & 12 inch diameter sieves.

Electromagnetic Sieve Shaker SV005

The shaker can hold up to 10 sieves. It is fitted with a digital 1 to 999 minute timer, accessed through the digital control panel. This separate panel also gives the user control of the vibration intensity and pauses between sieving actions, which is particularly useful when sieving fine materials. Wet sieving lids & receivers in the appropriate sizes may be used with this shaker.

SV005 Specification
Digital Control Panel Functions 1 - 999 minute test timer
Pause timer
Vibration intensity
Rating 450/750W
Power Supply 220-240V 50/60Hz 1ph
Dimensions 380 x 440 x 1080mm
Weight 65kg

SV007 Electromagnetic Sieve Shaker for 200, 250, 300, 315, 350 & 400mm 8 & 12 inch diameter sieves to EN 932/5, ISO 3310/1

This Sieve Shaker uses electromagnetic impulses to impart a triple vibrating action.

  • Vertical
  • Lateral
  • Rotational

The shaker is of a simple and sturdy construction making it ideal for continuous and intense use. It is operated and controlled via a separate control panel enabling high precision, performance and repeatability.

This unit will accept 200, 250, 300, 315, 350 & 400mm 8 & 12 inch diameter sieves.

Electromagnetic Sieve Shaker SV007

The shaker can hold up to 10 sieves. It is fitted with a digital 1 to 999 minute timer, accessed through the digital control panel. This separate panel also gives the user control of the vibration intensity and pauses between sieving actions, which is particularly useful when sieving fine materials. Wet sieving lids & receivers in the appropriate sizes may be used with this shaker.

SV007 Specification
Digital Control Panel Functions 1 - 999 minute test timer
Pause timer
Vibration intensity
Rating 450/750W
Power Supply 220-240V 50/60Hz 1ph
Dimensions 430 x 460 x 1150mm
Weight 80kg

SV008 Electromagnetic Sieve Shaker for 200, 250, 300, 315, 350, 400 & 450mm 8, 12 & 18 inch diameter sieves to EN 932/5, ISO 3310/1

This Sieve Shaker uses electromagnetic impulses to impart a triple vibrating action.

  • Vertical
  • Lateral
  • Rotational

The shaker is of a simple and sturdy construction making it ideal for continuous and intense use. It is operated and controlled via a separate control panel enabling high precision, performance and repeatability.

This unit will accept 200, 250, 300, 315, 350, 400 & 450mm 8, 12 & 18 inch diameter sieves.

Electromagnetic Sieve Shaker SV008

The shaker can hold up to 10 sieves. It is fitted with a digital 1 to 999 minute timer, accessed through the digital control panel. This separate panel also gives the user control of the vibration intensity and pauses between sieving actions, which is particularly useful when sieving fine materials. Wet sieving lids & receivers in the appropriate sizes may be used with this shaker.

SV008 Specification
Digital Control Panel Functions 1 - 999 minute test timer
Pause timer
Vibration intensity
Rating 450/750W
Power Supply 220-240V 50/60Hz 1ph
Dimensions 480 x 500 x 1150mm
Weight 85kg

SV010 Hand Operated Sieve Shaker for 200mm & 8 inch diameter sieves

This shaker has been specifically designed for site or laboratory use where electricity is not available.

By rotating the crank the shaker applies a vertical and rotational vibration action.

This unit will accept 200mm & 8 inch diameter sieves.

Hand Operated Sieve Shaker SV010

The shaker can hold up to six sieves plus lid & receiver. It is fitted with a 0 to 60 minute timer. Wet sieving lids & receivers in the appropriate sizes may be used with this shaker.

SV010 Specification
Dimensions 350 x 450 x 600mm
Weight 16kg

SV012 Ro-Tap® Sieve Shaker for 200mm & 8 inch diameter sieves

The Ro-Tap® shaker accepts up to 6 full-height 200mm or 8 inch sieves or 13 half-height 200mm or 8 inch sieves, plus a full height receiver.

This unit will accept 200mm & 8 inch diameter sieves.

Ro-Tap Sieve Shaker SV012

The Ro-Tap® Sieve Shaker provides a compact design and aggressive sieving action. This shaker provides 278 oscillations and 150 taps per minute to produce an effective sieving action. It is powered by a 1/4 hp motor and provides a built-in 99 minute step-down timer.

SV012 Specification
Timer 99 minute step-down
Motor 1/4 HP
Power Supply 220V 50Hz 1ph
Dimensions 711 x 533 x 635mm
Weight 86kg

SV015 Screen Tray Sieve Shaker for screen tray sieves 457mm wide x 660mm long x 75mm deep

This high capacity sieve shaker is designed for sieving considerable quantities of any material & accepts up to 30 litres of sample material.

Sturdily constructed, the machine can hold five screen tray sieves and a dust pan. The screen tray sieves are 457mm wide x 660mm long x 75mm deep.

Screen Tray Shaker SV015

A dust pan is available for the screen shaker. Impact part number SZ141. Screen tray sieves are not supplied with the shaker and can be ordered separately.

SV015 Specification
Capacity 30 litres
Number of trays 5 + dust pan
Rating 750W
Power Supply 220-240V 50Hz 1ph
Dimensions 585 x 790 x 850mm
Weight 180kg

SV016 Air Jet Sieving System for 200mm diameter air jet sieves, range 5 to 4000 µm

The Air Jet system is suitable for sieving powder and dry grain products, obtaining sieving results between 5 to 4000 microns. A vacuum machine applies a controlled decrease of pressure to the chamber beneath the sieve, drawing air out of the sieve through the apertures and carrying with it any particles smaller than the sieve aperture size.

This unit will accept 200mm diameter air jet sieves.

Air Jet System SV016

The vacuum machine is equipped with an automatic filter cartridge cleaning system, which allows many tests before replacement is needed.

The microprocessor controlled digital keypad can be used to adjust:

  • Sieving time from 0 to 99 minutes
  • Vacuum range from 0 to 99 bar
  • Calibration function

The Air Jet System is supplied complete with a vacuum machine, Plexiglass cover, filter cartridge, 5 plastic collection bags & accessories.

Please Note: Impact recommends using an SV492 'O' Ring on each of the air jet sieves, as this gives a better seal.

SV016 Specification
Power Supply 230V 50Hz 1ph
Dimensions 450 x 600 x 400mm
Weight 25kg

Air Jet Sieves

Visit the Air Jet Sieve Selector page for all Air Jet sieves from Impact.

SV017 Portable Sieve Analyser for 200mm & 8 inch diameter sieves

The Portable Sieve Test Analyser is designed to reduce the time and eliminate the operator error associated with sieve analysis. The Sieve Test Analyser accurately weighs and stores the net weight of the sieves and receiver before sieving. It compares the weights of the empty sieve with the gross weight after sieving. Necessary calculations are then made to provide a detailed analysis of the particle size distribution, including weight retained, percent retained, and percent passing, giving you accurate sieve results in a matter of seconds. The Sieve Test Analyser saves time, because it weighs, calculates, and stores sieve test results.

This unit will accept 200mm & 8 inch diameter sieves & can hold up to 17 sieves plus a receiver.

Sieve Analyser SV017

The unit has a self-contained electronic balance, digital readout and computer memory, all contained in a plastic case designed to be used in a production facility or laboratory.

To perform a sieve analysis, run a standard sieve test using a shaker. Choose the corresponding sieve stack from the sieve analyser's memory. The analyser has the capacity to store up to 10 sieve stacks. The analyser will prompt to weigh each full sieve and the user places it on the weighing platform. The analyser records the full weight of the sieve and calculates the weight and percent retained of the sample on the spot. There is no need to reweigh or calculate percentages.

For many companies, a standard sieve test is the only method available to produce a consistent product. As requirements have become more stringent for traceability (e.g. ISO 9000) within the manufacturing process and with suppliers, the ability of equipment to interface with computers is essential. The Sieve Test Analyser allows the user to monitor and record individual sieve test results using a computer. With greater emphasis on quality of processing, the Sieve Test Analyser goes a long way to address some of the limitations of sieve analysis whilst giving repeatability and accuracy to a test that is, and will continue to be, relied upon world wide.

SV017 Specification
Balance capacity 10,000g
Balance resolution 0.02g
Power Supply 110 or 220V
Dimensions 350 x 400 x 95mm
Weight 10kg

SV020 Inclyno Sieve Shaker for 200 & 300mm diameter sieves

This is a heavy duty, floor standing Sieve Shaker with a unique gyratory sieving action.

This unit will accept 14 x 200mm or 7 x 300mm diameter sieves. It is fitted with a quick release clamp mechanism & a digital timer.

Inclyno Sieve Shaker SV020

The sieve table of the Inclyno is always inclined to the axis of the machine. The table does not rotate but moves in a gyratory motion at 2rpm. This gyratory movement spreads the material over the entire surface of the mesh of each sieve but does not throw material high against the sides of the sieve. At the same time the table lifts and falls (at 300 jolts per minute) over a short distance. These two simultaneous movements ensure that each particle of material is given the optimum chance of passing through a sieve aperture.

SV020 Specification
Timer Digital
Rating 180W
Power Supply 230V 50Hz 1ph
Dimensions 553 x 320 x 1257mm
Weight 74kg

SV025 Inclyno 3 Sieve Shaker for 200 & 300mm diameter sieves

This is a heavy duty, floor standing Sieve Shaker with a unique gyratory sieving action.

This unit will accept 14 x 200mm or 7 x 300mm or 5 x 450mm diameter sieves. It is fitted with a quick release clamp mechanism & a digital timer.

Inclyno Sieve Shaker SV025

The sieve table of the Inclyno is always inclined to the axis of the machine. The table does not rotate but moves in a gyratory motion at 2rpm. This gyratory movement spreads the material over the entire surface of the mesh of each sieve but does not throw material high against the sides of the sieve. At the same time the table lifts and falls (at 300 jolts per minute) over a short distance. These two simultaneous movements ensure that each particle of material is given the optimum chance of passing through a sieve aperture.

SV025 Specification
Timer Digital
Rating 180W
Power Supply 230V 50Hz 1ph
Dimensions 705 x 475 x 1257mm
Weight 79kg

SV029 Sound Reduction Cabinet for use with SV001, SV003 & SV005 sieve shakers

The sound reduction cabinet for sieve shakers is lined internally with sound-proofing material for noise reduction to CE Directive.

Sound Reduction Cabinet SV029

The cabinet is suitable for use with our SV001, SV003 & SV005 sieve shakers.

Click to download a PDF file with dimensions.

Sieve Shakers - power requirements

  SV001 SV003 SV005 SV007 SV008 SV010 SV012 SV015 SV016 SV017 SV020 SV025
Voltage 230V 220-240V 230V 230V 230V N/A 220V 220V 220V 110/240V 230V 230V
Frequency 50Hz 50Hz 50Hz 50Hz 50Hz Hand 50Hz 50Hz 50Hz 50/60Hz 50Hz 50Hz
Motor rating 110W 370W 450/750W 450/750W 450/750W Operated 1/4 hp 370W 370W 220/460W 180W 180W
Visit the Downloads page for Brochures & User Guides